SAN JUAN, Puerto Rico — The Coast Guard Cutter Donald Horsley crew repatriated 66 migrants to the Dominican Republic May 18, following the interdiction of two illegal voyages in Mona Passage waters off Puerto Rico. 

The interdicted migrants consisted of 55 men and 11 women claiming to be Dominican Republic nationals.  

The interdictions are the result of ongoing efforts by Caribbean Border Interagency Group (CBIG) partner agencies to combat illegal migrant smuggling. 

The aircrew of a U.S. Customs and Border Protection maritime patrol aircraft detected the first illegal voyage May 17, approximately 47 nautical miles northwest of Aguadilla, Puerto Rico.   The Coast Guard Cutter Donald Horsley responded to the sighting and interdicted the suspect vessel with the assistance of the cutter’s small boat.  The cutter’s crew safely embarked the migrants, 44 men and 10 women, from a grossly overloaded 28-foot makeshift vessel that was riding low and taking on water.  

The crew of a Puerto Rico Police Joint Force of Rapid Action marine unit interdicted the second illegal voyage May 18, approximately three nautical miles off the coast of Aguadilla, Puerto Rico.  The Coast Guard Cutter Winslow Griesser arrived on scene shortly thereafter and embarked the migrants, 11 men and a woman, from the 20-foot makeshift vessel.  The migrant group later embarked aboard the Coast Guard Cutter Donald Horsley for their repatriation. 

Prior to embarking, the Coast Guard crews provided the migrants with lifejackets.  Once aboard a Coast Guard cutter, they receive food, water and basic medical attention. 

“Illegal migrant voyages in the Mona Passage are incredibly dangerous,” said Lt. Christopher Martin, cutter Donald Horsley commanding officer. “The vessels utilized in these ventures are often unseaworthy, lack basic safety equipment, and are grossly overloaded putting each person on the voyage at risk. We are fortunate we were able to locate these vessels before the situation worsened, safely removing all 66 persons and repatriating them to the Dominican Republic.” 

The cutter Donald Horsley rendezvoused with a Dominican Republic Navy vessel just off Punta Cana, Dominican Republic, where the crew transferred and completed the repatriation of the migrants to Dominican Republic Navy authorities. 

Cutters Donald Horsley and Winslow Griesser are 154-foot fast response cutters homeported in San Juan, Puerto Rico. 

MIAMI — The Coast Guard Cutter William Trump crew repatriated 22 Cuban migrants to Cuba, Friday, from two interdictions, the Coast Guard 7^th District said in a May 14 release. 

In the first interdiction, a Coast Guard Station Key West small boat crew and Customs and Border Protection Air and Marine surface asset located a migrant vessel, Saturday, after CBP AMO’s maritime patrol aircraft reported two personal watercrafts headed northbound approximately 26 miles southeast of Key West.  

In the second interdiction, Coast Guard Cutter Isaac Mayo crew intersected the chug approximately 82 miles southwest of Key West and embarked the migrants with no medical concerns reported. 

“Migrant interdiction patrols help save lives by deterring dangerous illegal migrant activity and removing migrants from dangerous environments,” said Capt. Michael Gesele, Coast Guard District Seven Chief of Enforcement. “The Coast Guard patrols the Florida Straits, Windward Passage and the Mona Passage, maintaining a solid presence with air and sea assets. Migrants attempting to enter the United States illegally can expect to be repatriated, regardless of their nationality.” 

Since Oct. 1, 2020, Coast Guard crews have interdicted 228 Cubans compared to: 

5,396 Cuban migrants in Fiscal Year 2016 

1,468 Cuban migrants in Fiscal Year 2017 

259 Cuban migrants in Fiscal Year 2018 

313 Cuban migrants in Fiscal Year 2019 

49 Cuban migrants in Fiscal Year 2020.

Once aboard a Coast Guard cutter, all migrants receive food, water, shelter and basic medical attention. Throughout the interdiction, Coast Guard crew members were equipped with personal protective equipment to minimize potential exposure to any possible case of COVID-19. There were no migrants in these cases reported to have any COVID-19 related symptoms. 

BLACK SEA — The Legend-class national security cutter USCGC Hamilton (WMSL 753) transited from the Black Sea to the Mediterranean Sea, concluding the crew’s recent Black Sea operations and engagements, May 14, 2021, the Coast Guard Atlantic Area said in a May 15 release. 
 
Hamilton entered the Black Sea on April 27, 2021, in support of NATO Allies and partners. Hamilton is the first U.S. Coast Guard cutter to visit the Black Sea since 2008. The last U.S. Coast Guard cutter to visit the Black Sea, USCGC Dallas (WHEC 716), sailed to the Black Sea twice, in 2008 and 1995. 
 
“Operating in the Black Sea these last few weeks has strengthened our enduring partnerships with regional maritime forces,” said Capt. Timothy Cronin, commanding officer of Hamilton. “Our time in this critical waterway also reinforced our commitment to maintaining freedom of movement in international waters for all nations. The Black Sea is not owned by any one nation; it belongs to the world.” 
 
While in the Black Sea, the crew of Hamilton operated with Black Sea partner navies and coast guards and made two port visits. 
 
Within the first week of arriving in the Black Sea, Hamilton’s operations with the Turkish navy Yavuz-class TCG Turgutreis (F 241) included passing exercises and cross-platform helicopter operations with a Turkish Bell UH-1 Iroquois helicopter and their embarked U.S. Coast Guard MH-65 Dolphin helicopter. 
 
Hamilton conducted exercises with the Georgian coast guard. Hamilton crewmembers executed search and rescue patterns, simulated survivor rescue training, helicopter hoisting evolutions, approaches for towing, and ship communications with the Georgian coast guard vessels Dioskuria (P 25) and Ochamchire (P 23), May 2-3. These maneuvers and operations enhanced the proficiency in specific mission areas familiar to both coast guards. 
 
On May 4, the Hamilton team called on Batumi, Georgia, for engagements with Georgian coast guard leadership and local Georgian representatives. Upon arrival, the crew was greeted with a Georgian demonstration of dancing and singing after conducting the U.S. and Georgian national anthems. The Georgian coast guard and Hamilton also conducted several tours, a dinner, and a five-kilometer run to foster camaraderie. 
 
Hamilton conducted maritime law enforcement, search and rescue, and ship handling operations with Ukrainian navy vessel Island-class patrol boat Starobilsk (P 241) and Ukrainian border guard vessel Kuropiatnikov (BG 50), May 9-10.  
 
These operations increased interoperability as a part of a regional effort to bolster maritime partnerships with NATO Allies and partners. The next day, Hamilton conducted a port visit in Odesa, Ukraine, where the crew conducted maritime law enforcement training with the maritime border guard and exchanged damage control and firefighting expertise with the Ukrainian navy. Hamilton also served as the training platform for the Ukrainian 73rd Special Force Unit to conduct maritime law enforcement training. 
 
The Hamilton crew conducted its final operations in the Black Sea with Romanian Navy Frigate Mărășești (F111) and Bulgarian corvette Bodri (BGS 14) on May 13, 2021. The vessels executed passing and communications exercises and flight operations with the Hamilton’s MH-65 Dolphin helicopter detachment aircrew. 
 
The U.S. Coast Guard is conducting a routine deployment in U.S. Sixth Fleet, working alongside Allies, building maritime domain awareness, and sharing best practices with partner nation navies and coast guards. 
 
Hamilton is the fourth national security cutter and is the fifth named for the father of the U.S. Coast Guard, Alexander Hamilton, the first secretary of the treasury and advocate for creating the U.S. Revenue Cutter Service. 

PASCAGOULA, Miss. — Huntington Ingalls Industries’ Ingalls Shipbuilding division announced today the start of fabrication of Legend-class national security cutter Friedman (WMSL 760). The start of fabrication signifies the first 100 tons of steel have been cut, the company said in a May 11 release. 

“Our workforce has invested more than a decade of effort, creativity and resolve to make the Legend-class national security cutter production line incredibly efficient and strong,” Ingalls Shipbuilding President Kari Wilkinson said. “We are pleased to achieve this milestone and will continue to look for any additional opportunity in our processes and approaches to provide the most affordable and capable ships to our customers.” 

NSC 11 is named to honor Elizebeth Smith Friedman. Friedman was a code breaker during the Prohibition Era who, as a civilian, intercepted and solved coded messages from racketeers and gangs and delivered them to the Coast Guard. During World War II, she worked against German espionage communications and developed information that was critical to counterintelligence work in the Southern Hemisphere. Friedman’s work resulted in hundreds of criminal prosecutions, saved thousands of lives and laid the groundwork for the science of cryptology and the establishment of the modern-day National Security Agency.  

The Legend-class NSC is the most technologically advanced ship in the Coast Guard’s fleet, which enables it to meet the high demands required for maritime and homeland security, law enforcement, marine safety, environmental protection and national defense missions. NSCs are 418 feet long with a top speed of 28 knots, a range of 12,000 miles, an endurance of 60 days and a crew of 120. 

SAN JUAN, Puerto Rico — The Coast Guard Cutter Winslow Griesser crew repatriated 13 of 14 migrants to the Dominican Republic, following the interdiction of a migrant vessel just off the coast of Rincon, Puerto Rico, the Coast Guard 7th District said in a May 12 release. 

The migrant group consisting of 13 males, including a 16-year-old minor, and a pregnant woman, claimed being Dominican Republic nationals.  

One of the interdicted migrants remains in Puerto Rico to face possible federal prosecution on charges of attempted illegal re-entry into the United States.  

The interdiction is the result of ongoing efforts by Caribbean Border Interagency Group (CBIG) partner agencies to combat illegal migrant smuggling. 

Coast Guard watchstanders at Sector San Juan received a call from a U.S. Border Patrol agent at 3:39 a.m. May 9 reporting a Puerto Rico Police Joint Forces of Rapid Action marine unit had intercepted a migrant vessel, approximately three nautical miles off the island’s west coast. During the interdiction, two of the migrants jumped into the water and attempted to swim to shore. 

A Coast Guard MH-65 Dolphin helicopter from Air Station Borinquen launched to search for the two migrants in the water. Once on scene, the Coast Guard aircrew spotted the two men struggling to stay afloat and vectored in the Coast Guard Cutter Winslow Griesser’s cutter boat to their position. The Coast Guard boat crew safely recovered the two men, who were embarked, along with the other migrants, aboard the cutter Winslow Griesser. 

Prior to embarking, the Winslow Griesser crew provided the migrants with lifejackets. Once aboard the cutter, they received food, water and basic medical attention. 

“I commend the responding units in this case,” said Cmdr. Beau Powers, Sector San Juan chief of response. “Their efforts helped save two lives from drowning and ensured the safe return of 13 of the migrants to the Dominican Republic. We call out to anyone considering taking part in an illegal voyage across the Mona Passage that you not take to the sea. The perils are quite real, and your life and the lives of everyone else in the voyage will be in great danger.” 

The crew of the cutter Winslow Griesser transferred 12 adult migrants to a Dominican Republic Navy vessel May 10 and repatriated the minor to Dominican Republic authorities in Santo Domingo Tuesday morning. 

Cutter Winslow Griesser is a 154-foot fast response cutter homeported in San Juan, Puerto Rico. 

BLACK SEA — The Legend-class national security cutter USCGC Hamilton (WMSL 753) conducted a series of operational exercises with Ukraine, May 9, 2021, in the Black Sea, the Coast Guard Atlantic Area said in a May 9 release. 
 
Hamilton conducted maritime law enforcement, search and rescue, and ship handling operations with the Ukrainian navy vessel Island-class patrol boat Starobilsk (P 241). These operations were designed to increase interoperability as a part of a regional effort to bolster maritime partnerships with NATO partners. 
 
“Hamilton was honored to conduct at-sea operations with the Ukrainian navy,” said Capt. Timothy Cronin, commanding officer of Hamilton. “Because we have shared interests, these events promote our strong partnership in ensuring safe and lawful activity in the Black Sea.” 
 
The U.S. Coast Guard has a long and enduring partnership with regional maritime forces, particularly in strengthening maritime forces in Georgia and Ukraine. Hamilton conducted at sea engagements with the Georgian coast guard and a port visit in Batumi, Georgia, last week. 
 
“This was a great opportunity to interact and share best practices with the Ukrainian navy,” said Petty Officer 2nd Class Jason Dunsavage, Hamilton crew member. “Both of our crews take pride in being professional mariners, and today, we proved that. We look forward to doing it again.” 
 
Hamilton is the first U.S. Coast Guard cutter to visit the Black Sea since 2008. The last U.S. Coast Guard cutter to visit the Black Sea, USCGC Dallas (WHEC 716), sailed to the Black Sea twice, in 2008 and 1995. 
 
Hamilton is the fourth national security cutter and is the fifth cutter named for the father of the U.S. Coast Guard: Alexander Hamilton, the first Secretary of the Treasury and advocate for the creation of the U.S. Revenue Cutter Service. 
 
The U.S. Coast Guard is conducting a routine deployment in the U.S. 6th Fleet area of operations, working alongside NATO Allies and partners, building maritime domain awareness, and sharing best practices with partner nation navies and coast guards. 
 
 
 

PORTSMOUTH, Va. — The crew of the Coast Guard Cutter Legare (WMEC 912) returned to its homeport at Coast Guard Base Portsmouth, Virginia, after a seven week counter-narcotic patrol in the Central Caribbean on May 7, the Coast Guard 5th District said in a release. 

The crew of the Legare was deployed in support of Operation Unified Resolve/Martillo under the tactical control of Joint Interagency Task Force South (JIATF-S) and the Seventh Coast Guard District. 

The Legare crew patrolled over 8,000 nautical miles throughout the Central Caribbean where they worked in conjunction with Customs and Border Patrol, the Drug Enforcement Administration, the U.S. Navy, and other partner agencies. 

While on patrol, the Legare provided surface support to Coast Guard MH-60T Jayhawk helicopters that were forward-deployed to Air Station Borinquen, which specialize in airborne interdiction tactics. With the combined efforts of JIATF-S and allied nation assets, the Legare disrupted over $23.5 million dollars in contraband while patrolling known smuggling routes south of the Dominican Republic. 

“Once again the crew of Legare successfully overcame the dual challenges of the COVID-19 pandemic and operating a 30-year-old ship to complete our operational and unit objectives with resounding mission success,” said Cmdr. Malcolm Belt, commanding officer of the Legare. “I am especially appreciative of Legare’s family and friends ashore who support our crew while they continue to deal with COVID-19. In many ways, their lives at home right now are more difficult than ours at sea.” 

Prior to arriving in the Caribbean, the Legare successfully completed the 2021 Cutter Mid-Cycle Training Availability (CMTA) with Afloat Training Organization – Mayport in Florida. CMTA is a demanding week-long training period designed to evaluate onboard training teams and the crew’s response to emergency scenarios that may occur while on patrol.  

The Legare is a 270-foot medium-endurance cutter homeported in Portsmouth. 

TUNIS, Tunisia — The Sentinel-class fast response cutters USCGC Charles Moulthrope (WPC 1141) and USCGC Robert Goldman (WPC 1142) departed Tunis after a routine logistics visit and key leader engagements, April 25, the Coast Guard Atlantic Area said in a May 5 release. 
 
This port visit marks the cutters’ second stop while conducting operations in the U.S. 6th Fleet area of responsibility en route to their new homeport of Manama, Bahrain. 
 
The Moulthrope and Goldman work in Tunis builds on previous military operations with Tunisian forces, such as the USCGC Bear (WMEC 901) deployment conducting military-to-military operations with the Tunisian navy and royal Moroccan navy in 1999, USCGC Dallas’ (WHEC 716) work with Tunisian navy counterparts to share best practices for responding to maritime issues and at-sea emergencies in 1995, as well as ongoing international training efforts. 
 
This visit is a continuation of commitment to Tunisian partners, further enhancing cooperation between U.S. and Tunisian forces in support of shared security goals. In January 2021, Military Sealift Command Spearhead-class Expeditionary Fast Transport USNS Trenton (T EPF 5) and Tunisian navy partners conducted joint maritime operations to enhance maritime security, critical lifesaving capabilities, and Tunisia’s ability to protect its maritime borders. 
 
“The exercises showcased both the Tunisian naval forces and U.S. Coast Guard’s ability to operate as multi-mission partners through a variety of exercises ranging from defense operations to search and rescue and illegal fisheries enforcement — all of which highlighted our services’ similarities in both missions and responsibilities,” said Lt. Cmdr. Samuel Blase, commanding officer, Robert Goldman. 
 
During their stop in Tunis, Moulthrope and Goldman engaged with navy leadership, local dignitaries and conducted military-to-military exercises with the Tunisian navy for interoperability and familiarization. 
 
“It was an honor to help lead the first U.S. Coast Guard visit to Tunisia in over 25 years and strengthen our partnership with the Tunisian naval force. The engagements and maritime exercises highlighted service capabilities, promoted interoperability between both nations, and enhanced stability throughout the Mediterranean Sea,” said Lt. Cmdr. Steven Hulse, commanding officer of Charles Moulthrope. 
 
Charles Moulthrope and Robert Goldman are the first two of six Sentinel-class ships headed to U.S. Patrol Forces Southwest Asia. Established in 2002 to support Operation Iraqi Freedom, PATFORSWA played a critical role in maritime security and maritime infrastructure protection operations. It is the U.S. Coast Guard’s largest unit outside of the United States. 
 

BLACK SEA — The Legend-class national security cutter USCGC Hamilton (WMSL 753) crew conducted a series of operational exercises with the Georgian coast guard, May 2 to 3, 2021, in the Black Sea, the Coast Guard Atlantic Area said in a release. 

The Hamilton crew conducted search and rescue patterns, simulated survivor rescue training, helicopter hoisting evolutions, approaches for towing, and ship communications with the crews of Georgian coast guard vessels Dioskuria (P 25) and Ochamchire (P 23). These maneuvers and operations enhanced the proficiency in specific mission areas familiar to both coast guards. 
 
“The U.S. Coast Guard, along with the U.S. Navy, work closely with the Georgian coast guard on the maritime component of our robust security and defense partnership,” said Kelly Degnan, U.S. ambassador to Georgia. “We welcome Coast Guard Cutter Hamilton to train with their counterparts in the Georgian coast guard, engage with community leaders, and above all, reaffirm the United States’ commitment to Georgia’s territorial integrity.” 
 
The U.S. Coast Guard has been a consistent partner with European nations, strengthening and enforcing robust maritime governance. These exercises are designed to strengthen partnerships through interoperable capabilities and combined operations. 
 
We continue our substantial military training cooperation, ship visits, and joint military exercises that aim to help Georgia improve its self-defense capabilities and interoperability with allied and partner forces. 
 
“Hamilton was honored to conduct combined at-sea operations with the Georgian coast guard,” said Capt. Timothy Cronin, commanding officer of the Hamilton. “The U.S. Coast Guard values this partnership as we look to protect our shared interests by ensuring safe and lawful activity in the Black Sea.” 
 
The U.S. Coast Guard has a deep partnership with Georgia and the Georgian coast guard, dating back to its initial establishment in the late 1990s. Through the interagency partnership with the Department of Defense, Department of Homeland Security, and Department of State, the U.S. Coast Guard guided and developed the Georgian coast guard into a fully operational and successful maritime force. 
 
A resilient network of alliances and partnerships is the fabric of the free and open order. We build trust and interoperability with our allies and partners through combined exercises, operations, theater security cooperation, global health engagement, foreign internal defense, and capacity-building efforts. 
 
Hamilton is the first U.S. Coast Guard cutter to visit the Black Sea since 2008. The last U.S. Coast Guard cutter to visit the Black Sea, USCGC Dallas (WHEC 716), sailed to the Black Sea twice, in 2008 and 1995. 
 
Hamilton is the fourth national security cutter and is the fifth cutter named for the father of the U.S. Coast Guard — Alexander Hamilton, the first Secretary of the Treasury and advocate for the creation of the U.S. Revenue Cutter Service. 
 
The U.S. Coast Guard remains operational during COVID-19, following all COVID-19 safety precautions and regulations. 
 
The U.S. Coast Guard is conducting a routine deployment in the U.S. 6th Fleet area of operations, working alongside allies, building maritime domain awareness, and sharing best practices with partner nation navies and coast guards. 

ATHENS, Greece — The Sentinel-class fast response cutters USCGC Charles Moulthrope (WPC 1141) and USCGC Robert Goldman (WPC 1142) arrived in Athens for a routine logistics visit and key leader engagements, April 29, 2021, the Coast Guard Atlantic area said in an April 30 release. 
 
“A common theme discussed throughout our engagements with the Hellenic Coast Guard, government, and industry leaders is the long-standing history of cooperation between the United States and Greece, particularly in the maritime sector. The exercises and exchanges between our crews and the Hellenic Coast Guard continued this tradition of partnership between both nations,” said Lt. Cmdr. Steve Hulse, commanding officer of Charles Moulthrope.  
 
This port visit marks the cutters’ third stop while conducting operations in the U.S. 6th Fleet region en route to their new homeport of Manama, Bahrain. 
 
“It was a pleasure working alongside our Greek partners, celebrating the 200th anniversary of their independence, and gaining an understanding of the similarities in our services’ missions and responsibilities,” said Lt. Cmdr. Samuel Blase, commanding officer of Robert Goldman. 
 
The Moulthrope and Goldman Athens stop highlights the enduring partnership between the United States and Greece. It also provided exchanges between U.S. Coast Guard members and the Hellenic Coast Guard and Greek ministries before a planned underway exercise. The joint effort enhances the collective ability to respond to any number of maritime threats and challenges and builds familiarization across services. 
 
“I’m very happy to welcome the U.S. Coast Guard fast response cutters Robert Goldman and Charles Moulthrope to the port of Piraeus following their historic transatlantic voyage in support of Operation Trailblazer,” said U.S. Ambassador to Greece Geoffrey R. Pyatt. “For 200 years, the United States and Greece have stood shoulder-to-shoulder to uphold our shared democratic values and promote peace and stability in the region. Maritime ties have been at the heart of that relationship, starting with the relief ships that sailed from New England to Greece in the 1820s and continuing to the global partnership today between the U.S. Coast Guard and Greek shipping.” 
 
The U.S. Coast Guard worked with the Greek navy earlier this year in the Arabian Gulf under U.S. Naval Forces Central Command. The Greek ship HS Hydra joined cutters and patrol boats of the U.S. Coast Guard Patrol Forces Southwest Asia to operate alongside the two NATO partners. The U.S.-Greece relationship dates back more than 200 years, emphasizing democracy, partnership, and shared values. 
 
“The Coast Guard compliments efforts from the Navy and Marine Corps by providing critical security expertise in shallow water environments, specializing in law enforcement missions and techniques,” said Rear Adm. Wayne Baze, director, Maritime Headquarters, U.S. 6th Fleet. “Moulthrope and Goldman’s operations follow the aircraft carrier USS Dwight D. Eisenhower’s (CVN 69) visit to Souda Bay and work with the Hellenic Navy and Air Force. This dedicated, steady partnership demonstrates our shared commitment to security and stability across the entire maritime operations spectrum.”  
 
Moulthrope and Goldman are en route to their new homeport in Bahrain to support the Navy’s U.S. 5th Fleet and U.S. Coast Guard Patrol Forces Southwest Asia. While in the U.S. Navy’s 6th Fleet area of responsibility, the crews will support engagements with partner countries strengthening relationships and demonstrating our continued commitment to global maritime security and stability.  
 
Moulthrope and Goldman are the first two of six Sentinel-class ships headed to U.S. Patrol Forces Southwest Asia (PATFORSWA). Established in 2002 to support Operation Iraqi Freedom, PATFORSWA played a critical role in maritime security and maritime infrastructure protection operations. It is the U.S. Coast Guard’s largest unit outside of the United States.